PTFE tube Manufacturers
Product Size:
PTFE/ tube:
extrusion method
thickness 0.5-2mm, 7kgs per roll,
size such as 4*6mm,6*8mm,8*10mm,10*12mm,12*14mm etc..
PTFE/ pipe
extrusion method
thickness 2mm to 5mm
Length <4.2m
size such as 30*22*4200mm etc.
PTFE/ bush, hollow, sleeves
Mold method
thickness 5mm to 50mm
length <300mm
size such as 100*63mm*200mm
PTFE SHEET , sheet
PTFE / molded sheet square
3~120 ± 0.30~± 0.50 1000 x 1000
3~70 ± 0.30~± 0.60 1200 x 1200
3~60 ± 0.30~± 0.60 1500 x 1500
3~60 ± 0.50~± 1.00 1000 x 2000
Any other small size or PTFE round sheet we can do as order.
PTFE / Skived Sheet
0.1~12.0 <1200 ≥200m per roll for 1mm thickness
0.5~6.0 <2000
0.5~5.0 <2700
* We can supply such big semi product for 1mm sheet 200m length in roll.
PTFE extruded rod
5mm-150mm1000, 2000 mm length
5mm-200mm 1000mm
PTFE molded rod
180-250 1000mm
280-330 300 mm
400-500 200mm
Chemical Properties:
1 electric insulation material.
2 Excellent electrical properties
3 Good low and high temperature resistance -250-260C
4 heat-conductive,
5 Self lubricate with lowest co-efficient of friction,no oil lubrication
6 acid and alkali resistance, Chemical resistant
7 non-inflammable,anti-aging etc..
PTFE Products:
PTFE ROD/PIPE: molded rod/pipe and extrusion rod/pipe
PTFE SHEET: molded sheet and skived sheet
PTFE FILM: directional, half directional, non-directive film
PTFE TAPE/BALL/GASKET/SEAL/PUMP/PACKING and so on ON SELL
Physical:
Opaque, white, used within -180oC - +260oC for no load;
Essential color, or any other color as your order.
It should be homogeneous, with smooth surface without rift, crack, air bubble, flatted and mechanical scratch, a few exogenous impurities are permitted.
Application:
It is widely used as Sealing, insulate or lubricate parts in oil and chemical industry. Or for Capacitor dielectric, wire isolation, electrical instrument isolation in electric industry.
PTFE filled products:
Glass Fiber:enhance wear resistance and chemical resistance, Increases compressive strength, rigidity. Reduces creep and cold flow.
Graphite:Extremely low coefficient of friction, Fairy good compressive strength, good wear resistance.
Carbon: good thermal and chemical resistance, Resistance to deformation, Increases compressive strength, hardness, wear, and load properties. Various types and amounts of carbon can be added to alter conductivity.
Bronze:Enhanced dimensional stability and compressive strength, Increases hardness and wear resistance, high thermal conductivity. Not suitable for corrosive or electrical applications
Molybdenum Disulfide:Increases hardness, stiffness, and wear.Minimal effect on chemical and electrical properties.
Contact: Mr.Qian
Phone: +8613819275715
Tel: +8613819275715
Add: No. 1088, Zhongxing North Road, Wukang Town, Deqing County, Zhejiang Province, China